Laser Machine Control System with Dual Receivers & Hydraulic Control Unit

RedBack MCR910 Laser Machine Control System with Dual Receivers allows control on two planes such as depth of cut and angle of cut. Want to automate your Grader or Dozer, with the Redback Lasers MCR910 Machine Control System you can. The MCR910 offers autonomous control of your implement adjusting to the laser you have set through the two receivers and solenoid controller which adjusts your hydraulic rams. This works in conjunction with your laser which is supplied separately and often this is paired with the Redback Lasers DGL1010GM Laser. Your implement must be fitted with a Hydraulic block with a solenoid control valve. We can help you with the hydraulic requirements to marry into this system. 1800 768 858.

The MCR910 Dual Receiver Machine Control System is great for Box Blades, Grader Blades, Dozers, Bobcats, Skid Steers and more.

This machine control system comes with

• The in-cab dual control unit and mount.  This allows you to select between manual or automation control and adjust between fine and coarse operation
• Two Receivers and connection cables.  To be attached to poles on your machine
• The solenoid switch cable.  To operate the solenoid control valves

What you will need

• You will need a Red Beam Rotating Laser Level
• Two poles on your implement to attach the receivers to.
• Live hydraulic flow to the implement with a hydraulic block with a solenoid control valve
• A flow dampener on the hydraulic block so you can restrict your hydraulic flow.

Ideally, it would be best if you had a hydraulic flow rate of 40 Lpm or less.

Alternatively, we can design a complete custom solution for your needs

We can design a complete custom wiring harness and breakout junction boxes.  Connection Wiring harnesses to allow direct manual machine control of the implement. Complete hydraulic valve banks, blocks and flow restrictors to match your equipment.  See the videos below for examples of packages we have made for previous customers.  Need a quote call us on 1800 769 858.

If you are wanting more information regarding this or requiring a quote on a full setup please give our office a call on 1800 769 858

Machine Automation System Videos

RedBack Lasers Dual Machine Automation System fitted to a Clark Grader Blade with a Volvo/JCB Skidsteer. If you are looking for a system to automate your implement contact RedBack Lasers on 1800 769 858. RedBack Lasers your Australian Laser Level Specialists.
#automatedmachine #farming #earthmoving #earthmovingmachinery #skidsteer #jcb #volvo #redbacklasers #construction #laserlevel

2 0

YouTube Video PO_A5uUXV38

Laser Machine Automation Control with RedBack Lasers Dual Automation System fitted to a Grader Blade

RedBackLasers 407 views

RedBack Lasers can design the perfect customised machine automation system for your particular needs. In this unusual example, the customer wants to automate a single ram on a landplane but has other manual rams on the implement that need manual control. Do you have a custom automation job you need a quote on? then call RedBack Lasers on 1800 769 858

2 0

YouTube Video yemDsB1bKsM

RedBack Lasers Machine Automation Custom Single Ram Automation System

RedBackLasers 129 views

RedBack Lasers supply both Single and Dual Receiver Machine Automation Systems. We can additionally quote on custom wiring looms, Breakout boxes and necessary Hydraulic Valves etc to match up with your needs. Simply call us on 1800 769 858 and we can design a custom solution for you.

1 0

YouTube Video DZnQWuuXyL0

RedBack lasers Dual Receiver Automation System Customised with Hydrualics and Breakout box

RedBackLasers 54 views

RedBack Lasers Machine Automation Systems can be customised by us to work with pretty much any combination of machine and implement. In this particular example, the system is designed to operate on a Clark Grader Blade and a JCB Skidsteer. If you need a quote for your particular needs call us on 1800 769 858.

0 0

YouTube Video bwDZmrPR3Rg

RedBack Lasers Dual Laser Automation System Customised for a JCB Skidsteer and Clark grader blade.

RedBackLasers 87 views

A more in-depth look at RedBack Lasers Dual Laser Receiver Machine Control Automation Systems. These systems are ideal for various implements, including dozer blades and box blades. For more information and videos check out the RedBack Lasers Website here; https://www.redbacklasers.com.au/machine-automation-systems/
or give us a call 1800 769 858.

2 0

YouTube Video XlZ2lRCZWCk

RedBack lasers Dual Receiver Machine Control Automation Systems a more in depth look.

RedBackLasers 479 views

RedBack Lasers Machine Automation systems options included are Single Receiver Systems and Dual Receiver Systems. These systems control hydraulic levelling implements by automatically raising and lowering the cut compared to real-time information from a laser level. https://www.redbacklasers.com.au/machine-automation-systems/ For more information call us on 1800 769 858

5 0

YouTube Video 5f9EdFEcDAc

RedBack Lasers Machine Control Automation Systems.

RedBackLasers 4.5K views

Specifications

Receiver Specifications

• Degree of Protection – IP66
• Detection radius – 400m
• Receiving Angle – 360°
• Detection Accuracy – ±5mm
• Detection Window – 210mm
• Operating Temperature – -10℃～+50℃
• Power Supply – DC 12V/24V
• Size – 158x135x298mm
• Weight – 3kg

Control Unit Specifications

• Output Compatibility – Proportional Time (PT) Valve Control
• Control – manual/auto conversion
• Valve Compatibility – Dual proportional time (PT) valve control
• Maximum output current – 10A
• Horizontal LED display – green
• High/Low LEDs – red
• Show – High brightness LED indication
• Weight – 2.2kg
• Operating temperature – -10℃～+50℃
• Degree of Protection – IP56
• Voltage – DC12V/24V
• Size – 200x148x98mm

Warranty – 2 Year RedBack Warrant on RedBack Lasers components supplied

Also available is a single receiver version MCR900 for simple depth of cut machine automation HERE.