LR720 – RedBack Millimeter display Receiver for Rotating Lasers reads up to 45millimetre

Millimeter Display Receiver displays measurement 45 millimetre above and below level

The RedBack Lasers millimetre LR720 is a heavy-duty Millimeter Display Receiver for both RED and GREEN rotating laser levels.  The LR720 features a millimeter display and extended 100mm reception window, dual LCD back lit displays and three LED displays.

The RedBack LR720 provides a millimetre reading of up to 45mm above and 45mm below the level point and counts down the millimeters as you get closer to the level.  You can also set a custom zero-point based on the existing position of the laser beam if you wish.

The LR720 has 3 accuracy settings for level +/-1mm, 5mm and 9mm level bands.  The LR720 comes with a heavy-duty staff clamp and also has magnets built into the casing for mounting on steelwork etc.

Advantages

One of the biggest advantages of this Millimeter Receiver over a standard one is when performing coarse levelling tasks.  For example, If all you need is to be within 20mm (+/- 10mm) of level then just keep an eye on the reading and make sure it never hits 11mm either above or below.

The LR720 millimetre detector is powered by 4 “AA” batteries which are included when you purchase this receiver.

The RedBack LR720 is suitable for most visible rotating lasers and picks up both Red & Green.

Looking for a replacement Staff Clamp for the LR720?  You can find that HERE

RedBack Lasers service department also service and calibrate the following brands when possible; Topcon, Leica, Rugby, Geo Fennel, Spectra, Imex, Powerline, Tuf, Bosch, Dewalt, Laser Tec, General, Hilti, PLS, Fukuda, aLIne, Bince, Stabila, Stanley, sokkia, Bear, Apache